Stripe is manufactured from oak and is supplied in the colour of your choice or untreated oak veneer, with a decorative strip in the metal or any colour of your choice. The reversible motor gives the option of ducting out at the rear.
The wood is oak veneer. It is supplied in any colour of your choice, clear lacquered or untreated. The decorative strip is supplied in PVD metal or lacquered colour of your choice at no extra charge.
Stripe is also available as an Island hood.
Additional information
Width | 60 cm, 80 cm |
---|---|
Height | 420 mm |
Metal / Colour | Oak |
Energy Class | A++/A+ |
Extraction m3/t | 191/222/289/435 (B 664) |
Noise level dBA | 34/38/44/53 (B 63) |
Lights | LED 2700-5000K |
Outlet dimensions | 120/150 |
Height of wall attatcment | The height of the hood minus 10 mm |
Videoes
Tips and advices
The diameter, length and number of bends in the duct affects the efficiency of your extraction.
Often, the actual extraction is half of the motor capacity, due to poor installation. Use ducting that creates the least possible resistance. This means using ducting that is as smooth as possible inside with as few bends possible. In the case of flexible ducting, make sure the ducting is taught. Try to keep the distance of the ducting as short as possible. In situations where the distance is large and requires lots of bends, it’s best to get a hood with the highest possible extraction to compensate for the loss.
Documents
Here you can download documents in PDF-format.
Product Sheet: Click here
User manual: Click here
Installation instructions: Click here
Installation of long-life charcoal filter: Click here
Installation video: Click here
Can’t read PDF documents? Download free Adobe Acrobat Reader here