Argo
Argo has with fashionable style, powerful extraction at a low noise, along with an economical energy rating, it’s easy to understand why Argo is so popular.
Product information
The dimensions are slightly narrower than most hoods, which makes it the preferred choice for between cabinets. It can be installed with or without the chimney and ducting is simplified by a reversible motor, which allows the installer to duct to the top, or directly to the back (horizontally).
Argo is always supplied with steel chimney. For recirculation, the installation of the chimney is optional but a metal grid is advised as a safety precaution to cover the duct opening.
If you want Argo for recirculation, you must add a charcoal filter when ordering (article 9251).
For recirculation, the included duct does not need to be installed. The ventilation grille must then be added. The ventilation grille is available in white (article 9352) and black (article 9646).
Technical information
- Width: 550 cm, 80 cm
- Colour: Sort glass, hvitt glass
- Ventilation type: Duct-out, recirculation
- Energy class: A+
- Outlet dimension: 120/150 mm
- Extraction: 310/420/580/720 m3/t
- Noise level: 52/56/62/65
Recommendations
Most people place the cooking zone against a wall in the kitchen. This often simplifies the ducting from the kitchen exhaust fan to the open air, either directly through the wall behind or directly through the ceiling. Now the kitchen exhaust fan is also often connected to external motors or units that are located away from the kitchen. Installing straight wall hoods is very easy. The distance between the hood and the hob should be from 50–70 cm. For a gas stove, a minimum of 70 cm.
Documents
Here you can download documents in PDF format.
Product sheet: Click here
User manual: Click here
Installation manual: Click here
Complete dimensioned drawing: Click here
