Crystall 1160/1180
Crystall 1160 and 1180 is an improved version on the 1140, offering much higher extraction, lower noise and with it’s low energy rating, it’s a very economical unit to run.
With these features it’s clear why this is such a popular integrated model.
Silver-grey strip that can easily be changed to a white or black strip which come included. The hood will therefore always match your kitchen interior or white goods in general. Lighting 2 x LED. Good quality stainless steel filter.
Additional information
| Width | 60 cm, 80 cm |
|---|---|
| Ventilation forms | Duct-out, Recirculation |
| Energy class | A |
| Extraction m3/t | 270/380/520 |
| Noise level dBA | 47/53/60 |
| Lights | 2 x LED |
| Outlet dimensions mm | 120/150 |
Tips and advices
The diameter, length and number of bends in the duct affects the efficiency of your extraction.
Often, the actual extraction is half of the motor capacity, due to poor installation. Use ducting that creates the least possible resistance. This means using ducting that is as smooth as possible inside with as few bends possible. In the case of flexible ducting, make sure the ducting is taught. Try to keep the distance of the ducting as short as possible. In situations where the distance is large and requires lots of bends, it’s best to get a hood with the highest possible extraction to compensate for the loss.
The recommended distance above the hob is 50–75 cm. It will be easier to cook if the hood is raised slightly.
NB: The distance above a gas hob must be at least 75 cm due to the risk of fire.
Please check your local building regulations for clearance height restrictions for your hob from your hood.
Documents
Here you can download documents in PDF format.
Product Sheet: Click here
User manual: Click here
Installation manual: Click here
Can’t read PDF documents? Download free Adobe Acrobat Reader here
You may also like…
Installasjonspakke 1
kr 515 inkl. mva.
Installasjonspakke 2
kr 595 inkl. mva.
