Edge
Edge is a volume hood for balanced ventilation / common exhaust. The model is a good and affordable alternative to blocks of flats or multi-family homes.
With volume part for better cheese collection, width 60 cm, available in white and steel. Electronic switch with metal damper.
Additional information
| Ventilation forms | Balanced ventilation / Common exhaust |
|---|---|
| Colour / Metal | Hvit, Stål |
| Lightning | LED list |
| Outlet dimentions | 125 mm |
Tips and advices
The diameter, length and number of bends in the duct affects the efficiency of your extraction.
Often, the actual extraction is half of the motor capacity, due to poor installation. Use ducting that creates the least possible resistance. This means using ducting that is as smooth as possible inside with as few bends possible. In the case of flexible ducting, make sure the ducting is taught. Try to keep the distance of the ducting as short as possible. In situations where the distance is large and requires lots of bends, it’s best to get a hood with the highest possible extraction to compensate for the loss.
The recommended distance above the hob is 50–75 cm. It will be easier to cook if the hood is raised slightly.
NB: The distance above a gas hob must be at least 75 cm due to the risk of fire.
Please check your local building regulations for clearance height restrictions for your hob from your hood.
Documents
Here you can download documents in PDF-formats
User- and installation instructions: Click here
If you can not read PDF-documents Download Adobe Acrobat Reader for free here »
