It is available in 60 and 80 cm widths, and can be fitted in cabinets without a base panel.
Additional information
Width | 598 mm, 798 mm |
---|---|
Ventilation forms | Duct out, Recirculation |
Energy class | A |
Extraction m3/t | 280/420/570 (B 670) |
Noise level dBA | 53/62/68 (B 70) |
Lights | 2 x LED |
Outlet dimensions | 120/150 mm |
Tips and advices
The diameter, length and number of bends in the duct affects the efficiency of your extraction.
Often, the actual extraction is half of the motor capacity, due to poor installation. Use ducting that creates the least possible resistance. This means using ducting that is as smooth as possible inside with as few bends possible. In the case of flexible ducting, make sure the ducting is taught. Try to keep the distance of the ducting as short as possible. In situations where the distance is large and requires lots of bends, it’s best to get a hood with the highest possible extraction to compensate for the loss.
The recommended distance above the hob is 50–75 cm. It will be easier to cook if the hood is raised slightly.
NB: The distance above a gas hob must be at least 75 cm due to the risk of fire.
Please check your local building regulations for clearance height restrictions for your hob from your hood.
Documents
Here you can download documents in PDF-format.
User and installation manual: Click here
Do you need more user instructions? Click here
If you cannot read PDF-files: Download free Adobe Acrobat Reader here »