Delivered in silver gray / black design with silver colored front strip. The insert can be mounted in cabinets with and without a base plate and requires a hull depth of at least 30 cm.
Additional information
Size | 60 cm |
---|---|
Ventilation forms | Duct out, Recirculation |
Metal / Colour | Steel |
Energy class | C |
Extraction m3/t | 190/220/350 for Duct out |
Noise level dBA | 49/58/64 for duct out |
Lightning | 1x11W fluorescent lamps |
Outlet dimensions mm | 125 mm |
Tips and advices
The diameter, length and number of bends in the duct affects the efficiency of your extraction.
Often, the actual extraction is half of the motor capacity, due to poor installation. Use ducting that creates the least possible resistance. This means using ducting that is as smooth as possible inside with as few bends possible. In the case of flexible ducting, make sure the ducting is taught. Try to keep the distance of the ducting as short as possible. In situations where the distance is large and requires lots of bends, it’s best to get a hood with the highest possible extraction to compensate for the loss.
The recommended distance above the hob is 50–75 cm. It will be easier to cook if the hood is raised slightly.
NB: The distance above a gas hob must be at least 75 cm due to the risk of fire.
Please check your local building regulations for clearance height restrictions for your hob from your hood.
Documents
Here you can download documents in PDF format.
Product Sheet: Click here
User- and installation instructions: Click here
Can’t read PDF documents? Download free Adobe Acrobat Reader here