Product added to wishlist
View Wishlist


Add to Wishlist

Neptune is an integrated hood with perimetric extraction allowing higher airflow.

The product is not for sale through our website, only through our retailers.


The motor is reversible, so the exhaust can run out the back, top, or any of the sides. The minimum cabinet depth is 30 cm. It is fitted in a cabinet with
a base panel.

Additional information

54 cm, 77 cm, 99 cm

Ventilation forms

Duct out, Recirculation

Energy class


Extraction m3/t


Noise level dBA



2 x LED

Outlet dimensions

120/150 mm

Tips and advices

The diameter, length and number of bends in the duct affects the efficiency of your extraction.
Often, the actual extraction is half of the motor capacity, due to poor installation. Use ducting that creates the least possible resistance. This means using ducting that is as smooth as possible inside with as few bends possible. In the case of flexible ducting, make sure the ducting is taught. Try to keep the distance of the ducting as short as possible. In situations where the distance is large and requires lots of bends, it’s best to get a hood with the highest possible extraction to compensate for the loss.

The recommended distance above the hob is 50–75 cm. It will be easier to cook if the hood is raised slightly.
NB: The distance above a gas hob must be at least 75 cm due to the risk of fire.

Please check your local building regulations for clearance height restrictions for your hob from your hood.


Here you can download documents in PDF format.

Product Sheet: Click here
User instructionsClick here
Installation manual: Click here

Can’t read PDF documents? Download free Adobe Acrobat Reader here


You may also like…

Røros Metall AS
Stamphusveien 11
7374 Røros, Norway
(+47) 72 40 94 00

Opening hours other weeks:
Monday – Friday: 08:00 – 16:00
Saturday – Sunday: Closed

Click on the image
to download our catalogue.