Look has an energy-saving motor and is very quiet, and can save power consumption by up to 85 percent. This makes Look an environmentally friendly choice for normal ventilation and recirculation.
Look is also available as a wall-mounted hood.
Additional information
Size | 60 cm |
---|---|
Extraction 3m/t | 200/400/510/620 (B 680) |
Noise level dBA | 40/54/61/65 (B 69) |
Lightning | 4 x LED |
Outlet dimensions mm | 120/150 |
Energy class | A+ |
Tips and advices
The diameter, length and number of bends in the duct affects the efficiency of your extraction.
Often, the actual extraction is half of the motor capacity, due to poor installation. Use ducting that creates the least possible resistance. This means using ducting that is as smooth as possible inside with as few bends possible. In the case of flexible ducting, make sure the ducting is taught. Try to keep the distance of the ducting as short as possible. In situations where the distance is large and requires lots of bends, it’s best to get a hood with the highest possible extraction to compensate for the loss.
The recommended distance above the hob is 50–75 cm. It will be easier to cook if the hood is raised slightly.
NB: The distance above a gas hob must be at least 75 cm due to the risk of fire.
Please check your local building regulations for clearance height restrictions for your hob from your hood.
Dokumenter
Here you can download documents in PDF-format.
User- and mounting instructions: Click here
If you can not download PDF-documents: Download Adobe Acrobat Reader for free here »
Kan du ikke lese PDF-dokumenter? Last ned gratis Adobe Acrobat Reader her »